Types of UPS Alarms
Audible Alarm
Below are common scenarios that will produce different types of audible alarm from CyberPower UPS.
Visual Alarm
Our UPS is also equipped with either an LED indicator or LCD to indicate the health of the model.
Visual & Remote Alarm
The remote management solution helps users to monitor the product status anytime, anywhere.

When the UPS is running on battery power, it will typically emit 2 short beeps every 30 seconds.

Some UPS also come with LED indicator with three colored lights: green for normal, yellow for warning and red for fault notices, showing clear product status.

With the SNMP card installed, it allows users to perform remote management of UPS. Once an event happens, users can be notified through email, SNMP traps, Syslog or SMS.

If the internal battery of the UPS is almost out of charge, it will usually emit rapid beeping sounds twice every second.

On the other hand, most UPS are built-in with an LCD display to indicate detailed information such as battery mode, low battery, overloading and UPS fault to alert users of potential problems that might affect critical equipment and cause downtime.

The software helps users to manage the UPS locally or remotely. Besides providing an overview of system operation, the software can also send warning notifications automatically when a system event occurs, ensuring any faults to be dealt with timely.

Once the UPS has detected an overload condition, it will generally emit a long and continuous beeping sound.

Featuring color LCD function, the newest CyberPower UPS models not only can display real-time information, but also help users to easily identify UPS status: green for normal, yellow for warning, and red for fault notices.
*
**
Audible Alarm
Below are common scenarios that will produce different types of audible alarm from CyberPower UPS.

When the UPS is running on battery power, it will typically emit 2 short beeps every 30 seconds.

If the internal battery of the UPS is almost out of charge, it will usually emit rapid beeping sounds twice every second.

Once the UPS has detected an overload condition, it will generally emit a long and continuous beeping sound.
*
**
Visual Alarm
Our UPS is also equipped with either an LED indicator or LCD to indicate the health of the model.

Some UPS also come with LED indicator with three colored lights: green for normal, yellow for warning and red for fault notices, showing clear product status.

On the other hand, most UPS are built-in with an LCD display to indicate detailed information such as battery mode, low battery, overloading and UPS fault to alert users of potential problems that might affect critical equipment and cause downtime.

Featuring color LCD function, the newest CyberPower UPS models not only can display real-time information, but also help users to easily identify UPS status: green for normal, yellow for warning, and red for fault notices.
Visual & Remote Alarm
The remote management solution helps users to monitor the product status anytime, anywhere.

With the SNMP card installed, it allows users to perform remote management of UPS. Once an event happens, users can be notified through email, SNMP traps, Syslog or SMS.

The software helps users to manage the UPS locally or remotely. Besides providing an overview of system operation, the software can also send warning notifications automatically when a system event occurs, ensuring any faults to be dealt with timely.
The alarm system becomes a crucial part of our lives when an unexpected event occurs, and so does UPS. As you can see, the UPS comes with different types of alarm that can help users to catch potential problems before they happen. Be always one step ahead by understanding what UPS is trying to tell you and take appropriate actions.
For detailed product information, please refer to CyberPower website and/or product manual.
Your web browser is no longer supported.
Please upgrade to a modern, fully supported browser for best performance of the site.
By closing this window you acknowledge that your experience on our website may be degraded.
Find the serial number on your CyberPower products

Every CyberPower product has a unique serial number (S/N) and they can only be 12 or 16 digits.
The location of the serial number label may vary by different products, but you can find it on the back or bottom side of most products.
Information

Are you sure you want to leave this page? The selected itmes will be cleared.
Restart Stay on this pageThanks for registering with us. An email has been sent to you with a link to activate your account. If you do not receive the email, please check your spam folder or contact us.
OKThis serial number is not for a qualifying product. Please check if the serial number is the same as that on your package box.
OKYour password reset request has been submitted. An email with instructions will be sent to your inbox. If not received, please check your email spam or junk folder.
OKThis product is not available in your region.